Do You Know About Differential Pressure Transmitters? Get to Know Them with PESCO INSTRUMENT & METER CO., LTD
2023-12-02
How a Coriolis Mass Flow Meter Measures Density
2023-12-04
Vortex flowmeters are widely used in various industries for their high accuracy and reliability. As with any other measuring instrument, when not maintained properly, the accuracy of vortex flowmeters may be compromised. In this article, we will provide some daily maintenance tips to help you ensure that your vortex flowmeter performs at its best.
1. Regular Cleaning
When the measured medium is dirty or easy to scale, the inner wall of the flowmeter should be cleaned regularly. The frequency of cleaning depends on the specific situation. It is recommended to clean the vortex flowmeter at least once a month. If the medium is extremely dirty or prone to scaling, consider cleaning it more frequently.
To clean the flowmeter, first, remove the end cover of the meter body. Then, use a soft brush or cloth to clean the inner wall of the meter body. Pay special attention to the vortex generator and detection probe. Do not use sharp tools or corrosive cleaning agents as they may damage the meter body.
2. Protection During Cleaning
During cleaning, the vortex generator and detection probe should be well protected. The vortex generator is the heart of the vortex flowmeter, so it is critical to protect it from damage. Before cleaning, cover the vortex generator and detection probe with a cloth or plastic bag to prevent them from being damaged by cleaning solutions or other contaminants.
If the vortex generator or detection probe is damaged during cleaning or use, it should be replaced immediately to ensure the accuracy of the measurement.
3. Proper Wiring and Sealing
The end cover of the detection amplifier shell should be properly tightened after wiring debugging to ensure its tightness. Loose wiring or a poorly sealed amplifier can cause inaccurate readings or even damage the amplifier. Therefore, after wiring and debugging, check the end cover to ensure it is properly sealed.
4. Avoid Leaving Liquid and Sundries in the Housing
Do not leave liquid and sundries in the housing during maintenance and inspection. They can accumulate and cause damage or inaccurate readings over time. Therefore, after cleaning and maintenance, dry the flowmeter carefully and thoroughly.
5. Regular Calibration
To ensure the accuracy of the vortex flowmeter, it is necessary to calibrate it regularly. The specific frequency of calibration depends on the specific environment and usage. It is best to consult with the manufacturer or an experienced technician for advice on calibration frequency.
In summary, proper maintenance is critical to ensure the accuracy and reliability of vortex flowmeters. Regular cleaning, protection during cleaning, proper wiring and sealing, avoiding leaving liquid and sundries in the housing, and regular calibration are all essential components of daily maintenance. By following these tips, you can significantly extend the life of your vortex flowmeters and ensure accurate and reliable measurements.
